假如空气压缩机碰到无法启动的状况时，应当怎么办呢？不必惊慌，让空气压缩机专业技术人员来对你说。
What should I do if the air compressor encounters a situation where it cannot start? Don't panic, let the professional technical personnel of the air compressor speak to you.
1.查询开关电源，如果是开关电源未接通的情况，能够合上电源总开关以接入开关电源。
1. Check the switch power supply. If the switch power supply is not connected, the main power switch can be turned on to connect to the switch power supply.
2.控制电路熔断丝融断：必须马上拆换熔断丝，找到缘故并处理。
2. Control circuit fuse melting: It is necessary to immediately replace the fuse, find the cause, and handle it.
3.热过载继电器断掉：改正过载缘故，再次设置热过载电器。
3. The thermal overload relay is disconnected: Correct the cause of the overload and reset the thermal overload appliance.
4.如果是工作电压过低，必须请电力企业检查键入工作电压，中压船用系列并与电动机直流电压较为，检查工作电压过低的缘故。
4. If the working voltage is too low, it is necessary to ask the power company to check and input the working voltage, medium voltage marine series, and compare it with the DC voltage of the motor to check the reason for the low working voltage.
5.是不是开关电源常见故障，此刻必须检查供电系统一部分。
5. Is it a common malfunction of the switching power supply? At this moment, it is necessary to check a part of the power supply system.
6.是不是是由于接线上有松脱。这个时候应当检查全部接线节点，如果有松脱的地区将其拧紧。
6. Is it due to looseness in the wiring. At this time, all wiring nodes should be checked and tightened if there are any loose areas.
7.温度感应器常见故障：必须检查感应器，假如发生常见故障，必须联络技术专业维修人员检修。
7. Common faults of temperature sensors: The sensors must be checked. If a common fault occurs, technical professionals must be contacted for maintenance.
8.变电器常见故障：检查变电器次级线圈工作电压。
8. Common faults of the transformer: Check the working voltage of the secondary coil of the transformer.
9.热过载继电器断掉：改正过载缘定送水  铜鼎铜钟 淤泥固化设备 化粪池钢模具 拱形骨架模具 保定代理记账 保定道闸
故，再次设置热过载电器。
9. Thermal overload relay disconnection: Correct the cause of overload and reset the thermal overload appliance.
为保证发电机组正常的运作和有长的使用期限，优良的维护是重要。那麼我们在维护保养前必须做那些提前准备呢？要认真地实行螺杆式压缩机组的维修保养技术规范。
To ensure the normal operation and long service life of the generator set, excellent maintenance is important. So what preparations must we make in advance before maintenance and upkeep? We must conscientiously implement the technical specifications for the maintenance and repair of screw compressor units.